Building A & B: Glazing shall be prefinished thermally broken aluminum curtainwall system with black anodized frames, double glazed insulated vision glass, clear, low reflective panels. Spandrel to be single glazed glass with insulated metal back pan, harmony grey, low reflective panels. Manual operating entry doors with locks and hardware. Upgrades as required by code are to be by Purchaser.

Building A: Front and end walls – Constructed of structural steel frame with steel stud infill and metal panel/siding cladding finish. Windows and doors as per elevations. Rear wall – Constructed of structural steel frame with a combination of concrete block and masonry veneer finish and insulated steel stud framing with metal panel cladding finish. 30 units will receive one man door and one 3.0m x 3.0m overhead door. 4 units are front access only.

Building B: All walls constructed of structural steel frame with steel stud infill and metal panel/siding cladding finish. Windows and doors as per elevations.

Building A: Ground floor – exposed concrete slab on grade to receive Purchaser’s flooring.

Building B: Ground floor – exposed concrete slab on grade ready to receive Purchaser’s flooring. Second floor – exposed concrete composite deck ready to receive Purchaser’s flooring.

Building A: Demising walls to be concrete block to 10’ high with drywall partition above to underside of the roof.

Building B: Demising walls shall be metal framing and drywall. Corridor walls provided to separate the unit from the common area shall be unpainted on the units side and constructed as a fire rated gypsum board on metal stud framing with acoustic insulation.with acoustic insulation.